Skip to content

GHT, and the thread on every faucet

A US garden hose thread seals with a rubber washer, not on its threads. It looks like pipe thread and does not fit it properly.

What the thread is

American hose fittings use 3/4-inch garden hose thread, published as ASME B1.20.7 and often labeled GHT or NH. The standard pitch is 11.5 threads per inch.

How it seals

The threads hold the fitting together, and a rubber washer stops the water. That is why a new washer often cures a leaking joint.

Reading listings

Connector listings vary. The Nelson 50336 reads “3/4-8 NH”, which does not match the usual pitch of 11.5, so treat it as a listing quirk. The Eden tables list UNF, though they are hose fittings.

Products on this site this page helps you read

The questions that keep coming in

Are GHT and NH the same?

Yes, for garden hoses. Listings use both, and both mean the standard 3/4-inch hose thread.

Does GHT fit NPT?

It may start but will not seal properly. Use an adapter.

Why does my connector leak?

Usually a worn or missing washer. The joint seals on the washer.

Last reviewed November 1, 2026