Skip to content

NPT, and the thread that seals on itself

Pumps use tapered pipe thread rather than hose thread. The two look alike, and the joint will leak if you force one into the other.

How it works

NPT, or National Pipe Taper, narrows along its length, so the thread itself makes the seal when tightened, usually with tape or sealant.

Where it appears

Pump ports on this site use NPT: 1-inch on most portable pumps, and a 2-inch intake on the Red Lion.

Connecting to a hose

You need an NPT-to-GHT adapter. Some kits include one, so check the box.

Products on this site this page helps you read

The questions that keep coming in

Do I need thread tape?

Tapered threads usually need tape or sealant. Hose threads with a washer do not.

Can I connect a hose to a 1-inch NPT port?

Yes, with an adapter. The FLUENTPOWER pump includes hose adapters.

Which pumps here use NPT?

Aquastrong, LANCHEZ and VEVOR list 1-inch NPT, and Red Lion lists 2-inch and 1.5-inch female NPT.

Last reviewed November 1, 2026