Robot blades
Glanxy GLAN-055
Thirty blades at the standard 0.75 mm and 3 g, titanium nitride coated, double-ground, with thirty screws.
What the maker prints on its own page
The blades have a standard thickness of 0.75 mm and a lightweight design at
only 3 g, compatible with three named brands and stated to replace original
blades directly with the same operating stability.
The blade body is stainless steel with a titanium nitride coating that raises
the hardness, so the blades resist impacts from stones or branches and break
less often; the maker states the life exceeds conventional stainless blades.
Double-sided grinding gives the sharpness, and an arc-shaped design optimises
the cutting angle for clean cuts without fraying.
The coating protects against corrosion even in wet or muddy conditions, and
grass residues stick less, which extends maintenance intervals.
Thirty blades and thirty screws are supplied, with the thread depth stated as
optimised so vibration does not loosen them.
0.75 mm and 3 g.
Those are the standard original dimensions on this class of machine, and
stating them is what makes this listing checkable. A robot blade is a small
flat pivoting piece of steel; if the thickness and the mass match the original,
the disc’s balance and the pivot clearance are unchanged.
One set on this shelf is 0.9 mm — stronger, and heavier by a fifth on a disc
that was balanced around 0.75.
Screws, and why they are not an afterthought
Thirty screws with thirty blades.
The screw is what holds a three-gram blade onto a disc turning fast, and it is
undone and redone in grass, grit and damp. Machine makers generally specify a
new screw with each blade change for that reason, and the listing’s claim about
thread depth and vibration is aimed at the right failure.
Four sets on this shelf include screws. Two do not.
Coating
Titanium nitride, on stainless steel. Another set here uses titanium carbide.
Both are surface treatments that raise hardness, neither is quantified in any
listing on this shelf, and this page reports what each maker names rather than
ranking two unmeasured coatings.
What is missing
The length, and any specific model list — three brand names rather than named
machines. On a part whose whole fit is a hole and an outline, that leaves the
comparison to a photograph.
Availability
Around 11 €, read at the German Amazon store on the day of the survey.
Beyond the euro zone, the British Amazon store prices it in its own currency, which the spread above sets aside.
Listed and unsold: the American, French, Italian and Spanish Amazon catalogues hold the reference with nobody behind it.
Taken from Keepa on the day this page was last revised; stock and prices move without notice.
Prices quoted in this text were read on 26 September 2026. The live price is at the top of the page.
