Skip to content

Dörner + Helmer 709150

Every dimension published — 150 mm diameter, 12 mm bore, 32 mm hub, 30 mm wide — with a 25 kg rating and a plain bearing.

Dörner + Helmer 150 mm PVC wheel with plastic rim and lug tread

Dörner + Helmer 709150

Every dimension published — 150 mm diameter, 12 mm bore, 32 mm hub, 30 mm wide — with a 25 kg rating and a plain bearing.

Diameter
150 mm, as stated
Bore
12 mm, with a 32 mm hub length
Bearing
Plain bearing, as stated
Material
Plastic rim with a PVC tyre and a lug tread
Fits
Sold by dimension — garden equipment, mowers, carts and more
Pack
1
Amazon reference
B001HGLBUO (one reference across 6 Amazon marketplaces)
EAN
4002350501011
  • Four dimensions published — diameter, bore, hub length and width
  • A stated load rating of 25 kg
  • A plain bearing rather than a rolling one — more drag and more wear

Best for: Any machine with a 12 mm axle needing a 150 mm wheel, measured before ordering

Check price on Amazon

Specifications

Diameter
150 mm, as stated
Bore
12 mm, with a 32 mm hub length
Bearing
Plain bearing, as stated
Material
Plastic rim with a PVC tyre and a lug tread
Fits
Sold by dimension — garden equipment, mowers, carts and more
Pack
1
Amazon reference
B001HGLBUO (one reference across 6 Amazon marketplaces)
EAN
4002350501011

What the maker prints on its own page

A PVC wheel usable in many areas: garden equipment, lawnmowers, garden and transport carts, sun loungers, walking frames and toys. High load capacity: up to 25 kg, described as a practical and reliable component in private and professional use. A light wheel, with a resistant plastic rim and PVC tyre.

Product dimensions: 150 mm diameter, 12 mm bore, 32 mm hub length, 30 mm wheel width, with a lug tread and a plain bearing.

Four dimensions

Diameter, bore, hub length, width.

Nothing else on this shelf gives all four, and they are the four that decide whether a wheel fits:

Diameter sets the ride height, which on a mower is part of the cutting height.

Bore is the axle. Get this wrong and nothing else matters.

Hub length is the width of the wheel’s boss, which has to match the space between the deck bracket and the retaining clip.

Width is the tread, which decides how much it sinks into soft turf.

The plain bearing

Named, which is honest, and it is the cheap option.

A plain bush is a smooth cylinder the axle turns in. It has more friction than a rolling bearing and it wears into an oval over years, after which the wheel develops a wobble and the mower tracks badly.

On a light machine pushed a few times a month it will outlast the mower. On a heavy self-propelled one it is the wrong specification, and one wheel on this shelf states a proper bearing instead.

Sold by dimension

No mower is named anywhere, and the application list runs from lawnmowers to walking frames.

That is the right way to sell a generic wheel and it puts the work on the buyer: measure the old one. Diameter, bore, hub, width — four numbers, five minutes, and the answer is certain rather than trusted.

The price

The cheapest item on this entire shelf by a wide margin, and one of the cheapest on the site.

The spread across markets is extreme — the highest figure read is more than six times the lowest. This page reports each market’s figure on the survey date rather than converting one into another.

Availability

Around 3 €, read at the German Amazon store on the day of the survey.

Beyond the euro zone, the American and British Amazon stores price it in their own currencies, which the spread above sets aside.

More than 1.6× the cheapest country at the French and Italian Amazon stores; a gap of that size normally means forwarded stock rather than a seller on the ground, so the spread above leaves it out.

Listed and unsold: the Spanish Amazon catalogue holds the reference with nobody behind it.

Taken from Keepa on the day this page was last revised; stock and prices move without notice.

Prices quoted in this text were read on 26 September 2026. The live price is at the top of the page.

All mower wheels